Persons who have been hurt in a car accident, or during their sporting activities, may have damaged their spine in several ways. This can be quite debilitating, and may cause considerable pain that is necessary to relieve. The spinal column of the person may also now not be in perfect alignment, which is something that could require therapy to resolve. Pressure on the spinal column also needs to be eliminated. Under a doctor's guidance, the person could use a cervical traction device.
The purpose of this type of therapy is to realign the spine with a fairly forceful upward pulling motion. It is done to help eliminate any pain that is caused by the injured, or once-injured, person. The therapy involves pulling the skull gently in sessions that are performed over a period of time.
There are various types of products on the market that are used for this type of therapy. They can even be purchased from online locations. A pillow designed for a patient with back pain is one of the useful tools available. However, for traction, a patient may even be able to do a simple technique at home that will reduce pain from pinched nerves and injured spinal disks. It can be just as effective as prescribed medication.
Nothing fancy is required at home, only a door, a string, or rope, and a towel. A hand towel that is slightly smaller than a bath towel is ideal. Choose a door that has a handle, and that can be shut properly. Perhaps a carpeted area is best as well, as you will be lying on the floor. The process won't take long, just a few minutes.
Start the procedure by looping the rope around the door knob. Now tie the hanging end of the rope to one side of the towel. Make sure that all knots are firmly in place. Once this is achieved, the towel's other end should just touch the floor when no one is holding the rope. You are now set to start the traction procedure.
Lie on your back on the floor and place your head on the towel. You must make sure that your neck is not bending forwards, and that your back is kept straight. Likewise, your neck should not bend backwards either. The position should be comfortable.
Eventually, you will hold this position for fifteen minutes each day, but your first session will be just seven minutes. Each day will be one minute longer until you reach the maximum time of a quarter hour. You should always use a stopwatch as these times are crucial to not lessen or exceed.
There is no recommended number of sessions that should be completed. It can be done as long as it is relieving pain, or up until pain relief is experienced. This home cervical traction device is not dangerous in any way, and will not cause further pain. Before trying or buying anything though, it is probably best to confirm your options with your medical adviser.
The purpose of this type of therapy is to realign the spine with a fairly forceful upward pulling motion. It is done to help eliminate any pain that is caused by the injured, or once-injured, person. The therapy involves pulling the skull gently in sessions that are performed over a period of time.
There are various types of products on the market that are used for this type of therapy. They can even be purchased from online locations. A pillow designed for a patient with back pain is one of the useful tools available. However, for traction, a patient may even be able to do a simple technique at home that will reduce pain from pinched nerves and injured spinal disks. It can be just as effective as prescribed medication.
Nothing fancy is required at home, only a door, a string, or rope, and a towel. A hand towel that is slightly smaller than a bath towel is ideal. Choose a door that has a handle, and that can be shut properly. Perhaps a carpeted area is best as well, as you will be lying on the floor. The process won't take long, just a few minutes.
Start the procedure by looping the rope around the door knob. Now tie the hanging end of the rope to one side of the towel. Make sure that all knots are firmly in place. Once this is achieved, the towel's other end should just touch the floor when no one is holding the rope. You are now set to start the traction procedure.
Lie on your back on the floor and place your head on the towel. You must make sure that your neck is not bending forwards, and that your back is kept straight. Likewise, your neck should not bend backwards either. The position should be comfortable.
Eventually, you will hold this position for fifteen minutes each day, but your first session will be just seven minutes. Each day will be one minute longer until you reach the maximum time of a quarter hour. You should always use a stopwatch as these times are crucial to not lessen or exceed.
There is no recommended number of sessions that should be completed. It can be done as long as it is relieving pain, or up until pain relief is experienced. This home cervical traction device is not dangerous in any way, and will not cause further pain. Before trying or buying anything though, it is probably best to confirm your options with your medical adviser.
About the Author:
When you need to find a reliable cervical traction device, go to the web pages here at www.otctens.com today. More information is available at http://www.otctens.com now.
No comments:
Post a Comment