Although it is true that custom made arch support insoles for those who have flat feet must be made by a licensed professional, it is actually possible to make handmade orthotics at home. However, these types should only be made for those whose flat foot condition is not too severe. Basically, the homemade ones can be made for those who have low arches in order to stay safe.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
After getting a bunch of old insoles, then the next thing to do would be to get some super glue that is rather waterproof. Of course one will also be needing a pair of scissors that will be used to cut out these insoles. Once one has already gotten all of these materials, then he may now be able to make the homemade arch support.
So the very first thing to do would be to get at least two soles together and put one on top of the other. As stated above, make sure that all the soles are exactly the same size. From there, try to find the area where the arch of the foot is held.
When it is has been found, cut that part out from only one of the soles. In other words, cut out that part of one sole and make sure that the other sole is whole. From there, glue the one that was cut to the one that is whole using the super glue or the waterproof glue.
After that, one may now leave the glue to dry before he tries to put it into his shoe and start walking. If he wants the glue to dry extremely fast, then he may use an electric fan to be able to help him. For fast drying purposes, one is recommended to use super fast drying glue that really sticks.
Now if one would want to make his arch support taller than it already is, he can actually do so by adding another sole part to the insole. Now he has to get the third insole and just what he did a while ago. Once he has done that, he just once again has to let the glue dry and then try to walk with it.
Now if one is an athlete who needs a higher arch support or is a person who has a low arch, then he may actually make handmade orthotics at home to save money. Now if he has a very severe case of being flat footed, then it is best that he already buys a custom made one. Other than that, the handmade one is actually more than enough.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
After getting a bunch of old insoles, then the next thing to do would be to get some super glue that is rather waterproof. Of course one will also be needing a pair of scissors that will be used to cut out these insoles. Once one has already gotten all of these materials, then he may now be able to make the homemade arch support.
So the very first thing to do would be to get at least two soles together and put one on top of the other. As stated above, make sure that all the soles are exactly the same size. From there, try to find the area where the arch of the foot is held.
When it is has been found, cut that part out from only one of the soles. In other words, cut out that part of one sole and make sure that the other sole is whole. From there, glue the one that was cut to the one that is whole using the super glue or the waterproof glue.
After that, one may now leave the glue to dry before he tries to put it into his shoe and start walking. If he wants the glue to dry extremely fast, then he may use an electric fan to be able to help him. For fast drying purposes, one is recommended to use super fast drying glue that really sticks.
Now if one would want to make his arch support taller than it already is, he can actually do so by adding another sole part to the insole. Now he has to get the third insole and just what he did a while ago. Once he has done that, he just once again has to let the glue dry and then try to walk with it.
Now if one is an athlete who needs a higher arch support or is a person who has a low arch, then he may actually make handmade orthotics at home to save money. Now if he has a very severe case of being flat footed, then it is best that he already buys a custom made one. Other than that, the handmade one is actually more than enough.
No comments:
Post a Comment